Showing posts with label Galil. Show all posts
Showing posts with label Galil. Show all posts

Thursday, November 18, 2010

What is the difference between a rifle, SLR, submachine gun, carbine etc.?

A very common question among newbies to firearms history is "What is the difference between a rifle, a sub machine gun, a machine gun, a carbine, SLR, assault rifle etc." This post attempts to point out the differences and name famous weapons of each type.

Rifle: The name "rifle" originally comes from the fact that the barrel of such weapons is "rifled". This means that the barrel has grooves in it to impart spin to the bullet as it comes out of the barrel. This spin helps to stabilize the bullet as it travels through the air and gives it a predictable drift (e.g.) a particular rifle may fire bullets that travel 1-2 cm. to the right every 100 meters on a windless day. This feature allows the user to reasonably predict where a bullet will hit and gives the rifle its accuracy. Earlier firearms, such as muskets, had smooth barrels. Smooth bore weapons were much easier to manufacture than rifles, but lacked in accuracy, as the bullets didn't have stability in the air and deviated in a random direction from the intended target. Therefore, the standard strategy for European armies of that period was to line up men in parallel lines and tell them to all simultaneously open fire at the enemy, because almost no one could reliably hit the enemy that he was actually aiming for. This massed fire strategy worked because some enemy would be hit, even if they weren't the ones that were originally targeted. These days, most modern firearms, even small ones, such as revolvers and pistols, have rifled barrels. Therefore, in modern times, the word "rifle" by itself, implies a firearm that has a rifled barrel, is designed to be fired from the shoulder, is manually fed (i.e. after each shot fired, the user has to manually operate a lever to feed a new cartridge into the weapon) and carries a small number of cartridges internally (say 1 to 5 cartridges). Examples of modern rifles from the early 20th century would be the famous American .30-06 M1903 rifle, the British 0.303 Lee-Enfield, the Mauser M98 etc.

Assault Rifle: In the early part of the 20th century, it was realized by some military forces that most conscripted troops, who were hastily trained in wartime conditions, had less than a 50% chance of hitting a target beyond 300 meters. It was also realized that most infantry encounters occurred at less than 500 meters and rate of firepower was also an important factor in these encounters. It was therefore reasoned that there was no need to give such soldiers a weapon and ammunition capable of hitting targets at 2000+ meter ranges, since most soldiers could not hope to hit a target that far away in the first place. Instead, it was reasoned that it was better to give troops lesser powered (and therefore, smaller and lighter) ammunition to suit the actual ranges that most infantry engagements occurred at and a correspondingly lighter weapon suited to fire this ammunition. With lighter ammunition and weapon, the soldier could carry more ammunition and therefore use a weapon with a higher rate of fire. While the concept was around before World War II, it was the German StG 44 (Sturmgewehr 44) that really popularized the concept. The word Sturmgewehr was coined by Adolf Hitler and literally translates to "Storm Rifle" (the word "storm" being used in the context of "storming a castle" or "assaulting a castle") and the term "assault rifle" is actually a translation of "Sturmgewehr". Even though there were earlier weapons that could be classified as assault rifles, many historians consider the StG 44 as the first to form the concept of modern assault rifles. In these times, an assault rifle is a weapon with the following characteristics:
  • Has a rifled barrel (as in the case of the rifle described in the previous section).
  • Has provision to be fired from the shoulder, just like a rifle.
  • Uses an intermediate powered cartridge. This means that the cartridges are smaller than those used by a regular rifle, but larger than the cartridges used by a pistol. This is one of the key differences between an assault rifle and a regular rifle.
  • Is capable of selective fire modes. This means it allows the user to select between firing different numbers of shots each time the trigger is pulled. In semi automatic mode, the weapon will shoot one bullet each time the trigger is pulled. The weapon automatically chambers the next cartridge to fire, but the user needs to let go of the trigger and pull it again to shoot it. In burst mode, the weapon will fire a preset number of cartridges (say 2 or 3) with each trigger pull. In fully automatic mode, the weapon will continue to keep firing as long as the trigger is pulled and there is ammunition. The ability to switch between various modes of fire is a key feature that distinguishes an assault rifle from other types.
  • Has a detachable magazine. Most modern assault rifle magazines carry 20 to 30 cartridges or so.
Examples of assault rifles include the AK-47 family, the M16 family etc.

SLR: This is an acronym for "Self Loading Rifle". The term "SLR" is usually used in commonwealth countries. This has some common features with the assault rifle described above. Like the assault rifle, this is also a weapon that has a rifled barrel and is designed to be fired from the shoulder. It also uses an intermediate powered cartridge and has a detachable magazine like the assault rifle concept. The one key difference between assault rifles and SLRs is that SLRs have only one firing mode, the "semi-automatic mode". This means that each time the user pulls the trigger, the weapon will fire only one cartridge. It will automatically eject the fired cartridge, load the next cartridge and prepare the weapon to fire, but the user has to let go of the trigger and then pull it again to fire the next cartridge. This is unlike an assault rifle, which has multiple firing modes and allows the user to switch between them. Examples of SLRs would be weapons like the American AR-15 and the Indian Ishapore 1A1 SLR. The AR-15 is a semi-automatic version of the M16 rifle and the 1A1 is a semi-automatic version of the Belgian FN FAL assault rifle.

Carbine: This is a term used for weapons that are versions of rifles or assault rifles, but with a shorter barrel and lighter weight. Carbines are bigger than pistols, but smaller versions of rifles. In the days of the Wild West, mounted riders preferred a shorter and lighter firearm because these were easier to operate than full sized firearms, when riding. In more modern times, people inside moving vehicles or in close quarter jungle combat, preferred shorter weapons for the same reason. Since carbines have shorter barrels, they lack in accuracy compared to full sized rifles or assault rifles. While they use the same cartridge as their full sized cousins, the shorter barrel also means reduced velocity bullets. Many assault rifles also come in a carbine version. For example, the American M4 (a carbine version of the M16 assault rifle), the Israeli Galil SAR (a carbine version of the Galil assault rifle), Steyr AUG carbine ( based on Steyr AUG assault rifle. The carbine form uses a 16 inch barrel, whereas the assault rifle uses a 20 inch barrel) etc.

Submachine Gun: This is a weapon that shares some similarities with assault rifles, but one key difference is that submachine guns are designed to fire pistol cartridges instead of intermediate cartridges. As a result of this, submachine guns are generally lighter and smaller than assault rifles and are about the same dimensions or smaller than carbines. Since they use pistol ammunition, they also have less recoil and therefore can be fired from either the shoulder, the hip, or even holding it like a pistol. The first weapon to use the term "submachine gun" was the famous Tommy Gun that we studied about earlier. This is a fully automatic weapon that fires .45 ACP cartridges, the same cartridge used by the Colt M1911 pistol. Another famous submachine gun from the World War II era is the British Sten gun, which is also a fully automatic weapon. Modern submachine guns such as the Heckler and Koch MP-5 are capable of selecting multiple firing modes. Submachine guns are more preferred for close-range combat in urban environments because, with lower powered pistol cartridges, there is less risk of bullets penetrating through walls and hitting innocents on the other side

Machine Gun: This generally denotes a weapon that is capable of rapid, fully automatic fire and carries a large supply of ammunition. Fully automatic fire means that the weapon will keep firing as long as the trigger is pulled and there is a supply of ammunition available to it. Most machine guns fire either full sized or intermediate sized ammunition, similar to rifles and assault rifles. Machine guns generally carry a large supply of ammunition in ammunition belts, drum magazines or box magazines. This means that they generally have hundreds of cartridges available to them, unlike the 20-30 cartridge magazines used by assault rifles. They are also generally heavier than rifles and assault rifles. Examples of machine guns would be the Gatling Gun, the Gardner Gun, the Bira gun etc. Modern machine guns include the Browning Automatic Rifle (BAR), the British Bren gun, the American Stoner 63, the Belgian FN Minimi etc.

Sunday, October 17, 2010

Actions: Gas Operated: Long Stroke Piston

In our last post, we studied the gas operated, short stroke piston action. During this post, we will study the other gas operated action that uses pistons, the long stroke piston. This is a mechanism that was used by the American M1 Garand rifle (not the carbine, which uses a short stroke piston), the Soviet AK-47 family (and its various derivatives made in other countries, such as the Israeli Galil, Finnish Valmet etc.), the Belgian FN FAL assault rifle etc.

Like the short stroke piston we've already studied, when the cartridge is fired, hot high pressure gases are generated which push the bullet out of the barrel. Most of these hot gases also escape behind the bullet, but some of it is tapped out and used to operate the extraction and reloading mechanism to eject the spent cartridge and load the next cartridge.

Click to enlarge image
Original file licensed under GNU Free Documentation License version 1.2 by user Thuringius, on en.wikipedia.org

In the above image, (1) is the gas port from which a portion of the hot gases leaving the barrel are tapped. (2) is the head of the piston and (3) is the piston rod. (4) is the bolt that holds the cartridge in place in the breech and (5) is the bolt carrier that moves the bolt. (6) is the return spring.

Initially, the bolt holds the cartridge in place in the breech chamber. When the trigger is pulled, it releases the hammer (not shown in the image above), which strikes the base of the firing pin (not shown in the image above). The other end of the firing pin strikes the base of the cartridge, which detonates its primer. The primer in turn, causes the propellant of the cartridge to burn and generate hot, high pressure gases. The generated gases expand and push the bullet out of the barrel.


Click to enlarge image
Original file licensed under GNU Free Documentation License version 1.2 by user Thuringius, on en.wikipedia.org

As the bullet is pushed out of the barrel, some of the high pressure gases generated by the exploding cartridge are tapped via the port (1) and enter the tube containing the piston. The high pressure gases act upon the piston head (2) and push it backwards. Since the piston rod (3) is connected to bolt carrier (5), they move backwards, compressing the return spring (6). At the same time, the bolt carrier (5) also picks up bolt (4) and moves it backward at the same time. The bolt has an extraction pin that picks up the spent cartridge case and pulls it out of the breech. As the spent cartridge moves backwards, it is ejected out of the gun via a side port. The piston, bolt carrier and bolt continue to move backwards and re-cock the gun. Meanwhile the high pressure gases acting on the piston head (2) are dissipated via a vent hole in the tube. When the bolt carrier moves backwards to its maximum, the compressed return spring (6) pushes it forwards again. This moves the piston, bolt and bolt carrier forward again and on the way forward, they pick up a new cartridge from the magazine and push it into the breech chamber. Now the weapon is ready to fire again.





In the above animation, you can observe clearly how the mechanism works (including the hammer and firing pin, which were not present in the images above).

The main difference between the long stroke piston action and the short stroke piston action is that in a short stroke action, the piston moves back violently only a short distance (usually less than its own diameter) and then it is stopped by a projection. The bolt carrier then separates from the piston and continues to move backwards due to momentum. As a result of this, a short stroke piston action generally taps gases from closer to the breech (closed end of the barrel). In a long stroke action, the piston moves a distance greater than the length of the cartridge. In fact, the piston stays attached to the bolt carrier throughout the operation. This causes the piston to have greater dwell time and therefore, long stroke piston weapons generally tap their gases closer to the front end of the barrel (the muzzle). It also means that the operating parts are longer and therefore heavier than that of a short stroke piston action.

The advantages of this type of action are many. Like the short stroke piston action, the hot, high pressure gases only act upon the piston head and therefore, the other operating parts (the bolt, bolt carrier, trigger assembly, hammer, firing pin, return spring etc.) are not exposed to the hot gases or the dirty residue at all. These weapons can therefore accept a wide variety of cartridges using different quality propellants, since the dirty residue from low-quality propellants does not have a chance to contact most of the key operating parts of this action. This means a more reliable action and ease of maintenance of the weapon. The extra weight of the piston rod acting on the bolt carrier means more positive extraction, chambering and locking of the cartridges.

There are also some disadvantages. The main one is that the mass of the moving parts alter the center of gravity of the weapon and thereby make it harder to keep the weapon pointed on target, especially when firing in automatic mode. The abrupt stops and starts of the bolt carrier, piston and bolt at either end of the cycle also contribute to the shaking. Also, because the operating parts are longer, the overall weight of weapons that use this action are a bit heavier than short stroke piston actions.